background image

OUTDOOR TEMPERATURE
DISPLAYS shows the out-
door temperature.

ROOM TEMPERATURE 
DISPLAYS shows current
room temperature.

TIME OF DAY 
DISPLAY exhibits the
time of day.

MODE button selects OFF, HEAT,
COOL and AUTO operation. 
EMERGENCY HEAT (EHEAT) mode
is also included when the 
thermidistat control is installed 
with a heat pump.

FAN button
chooses ON
or AUTO fan 
operation.

END button
completes the 
temperature
and humidity
set-up
sequence.

SET HUM button
allows you to
change
humidification
set point.

SET TIME button
allows you to
enter the time
of day.

SET DHUM 
button allows
you to change
dehumidification
set point.

SET HEAT button
allows you to
enter your
desired heating
set point.

SET COOL button
allows you to
enter your
desired cooling
set point.

VACATION 
button changes
temperature 
and humidity 
set points to
lower levels 
for optimum 
energy 
efficiency while
you’re away.

RESET FILTER
FUNCTION restarts
the timer that 
determines the 
next air filter
change or cleaning.
Activated by press-
ing VACATION and
END buttons simul-
taneously. 

UP AND DOWN
buttons change 
the temperature
and humidity set
points. They are
also used to
access outdoor
temperature and
indoor humidity
levels.

AUXILIARY HEAT
INDICATOR
is displayed when
a heat pump sys-
tem’s auxiliary
heat is on.

CLEAN FILTER
INDICATOR
lets you know
when it’s time to
clean or replace
you system’s air
filter

Year-Round Comfort.

Bryant’s Thermidistat Control provides enhanced year-round comfort. 

By providing both temperature and humidity control, this simple yet powerful
device lets you take the steam out of summer, the static out of winter and helps
eliminate that annoying moisture build-up on your windows when it’s cold 
outside. Comfort has never been quite this easy.

Making Life Easier.

Bryant puts your family’s comfort at your fingertips with simple instructions,

responsive push buttons an an easy-to-read backlit LCD display. Once set, the
Thermidistat Control accurately monitors indoor conditions and reliably meets
your needs for consistent, energy-efficient indoor comfort.

NOTE: Not all messages displayed in above illustration will appear at once in any situation.

Summary of Contents for AND THERMIDISTAT CONTROL





































Reviews: