background image

1

Induced Combustion Gas Furnace

Owner’s Manual

NOTE TO INSTALLER:

THIS MANUAL MUST BE LEFT WITH

THE EQUIPMENT USER.

USER

: Please read all instructions in the manual and retain

all manuals for future reference.

A10252

D E

S I G N

C

E R

T I F I E

D

REGISTERED

ISO 9001:2000

Always Ask For

Use of the AHRI Certified TM Mark indicates a
manufacturer’s participation in the program.  For
verification of certification for individual products,
go to www.ahridirectory.org.

FIRE OR EXPLOSION HAZARD

Failure to follow safety warnings could result in injury, death,

or property damage.
Do not store or use gasoline or other flammable vapors and

liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS

--Do not try to light any appliance.

--Do not touch any electrical switch; do not use any

phone in your building.

--Leave the building immediately.

--Immediately call your gas supplier from a near by phone.

Follow the gas supplier’s instructions.

--If you cannot reach your gas supplier, call the fire

department.

Installation and service must be performed by a qualified

installer, service agency or the gas supplier.

!

WARNING

CARBON MONOXIDE POISONING HAZARD

Failure to follow this warning could result in personal

injury and/or death.
Carbon Monoxide is invisible, odorless, and toxic! Bryant

Heating and Cooling Systems recommends a carbon

monoxide alarm in your home, even if you do not own a

gas appliance. Locate the carbon monoxide alarm in the

living area of your home and away from gas appliances and

doorways to attached garages. Follow the alarm

manufacturer’s instruction included with the alarm.

!

WARNING

ELECTRICAL OPERATION HAZARD

Failure to follow this warning could result in personal injury,

death, or property damage.
Do not use this furnace if any part has been under water. A

flood--damaged furnace is extremely dangerous. Attempts to

use the furnace can result in fire or explosion. A qualified

service agency should be contacted to inspect the furnace and

to replace all gas controls, control system parts, electrical parts

that have been wet or the furnace if deemed necessary.

!

WARNING

Summary of Contents for 311JAV Legacy Line Plus 80











Reviews: