Brute YTL-015-691, Instruction & Assembly Manual

Page: 6 / 21

- 6 -
22 TON LOG SPLITTER ASSEMBLY
Set the shipping crate on a solid flat surface and carefully remove the lid. Use two people and
take all parts out of the shipping crate and inspect the components to ensure there are no missing
pieces before starting to assemble the log splitter follow steps 1 through 10.
TOOLS REQUIRED

Rubber or Wooden Hammer

13mm, 16mm, 17mm, 18mm, 19mm, 24mm, 27mm Wrenches

Large Adjustable Wrench

Phillips or Standard Screwdriver

Pliers
WARNING
Read and follow all instructions for assembly and operation. Failure to properly assemble this
equipment could result in serious injury to the user or bystanders, or cause equipment damage
.
Engine Shipped Without Oil.
Before starting engine, fill with SAE 10W-30 motor oil.
See engine manual for engine oil capacity.
Hydraulic Oil Tank is Shipped Without Oil.
When adding oil verify the oil level reads 1 from the top of hydraulic oil
tank if marking is not shown fill to the neck.
Inspect all Log Splitter Components.
If you have damaged components: Contact the freight company that
delivered the log splitter and file a claim.
Component Parts