V2017
4
B-128 Conservatory awning
Mounting instructions
35 cm
35 cm
=
=
Socket-head 3mm
Fastening plate
2. Plaatsen van de geleiders
› First remove the covers of the guides (socket-head 3 mm) and of the housing.
›
!
If a
support beam
is also placed, extra fastening plates must be slid into the guide. (1x left 1x right) Make sure that the guide
plates are in the correct place, before and/or behind the guide support.
› Slide the guides on the housing.
› Determine the position of the supports. The back of the support comes flush with the back of the guide.
› Place the top support and bottom support approximately 35 cm from the end. Spread the other supports equally between the first and
last support.
›
!
With
hanging veranda beams
, use shims between the guide and the central support to align the guide supports.
› Take the guide off again to fasten the supports.
› Use a double guide support if an additional veranda screen is placed alongside.
Number of supports per extension
0,5 - 1,5
1,51 - 2,5
2,51 - 4
4,01 - 5
2
3
4
5
