Brusa BDC546, Technical Data And Start-Up

Page: 32 / 87

Technical data
and start-up
BDC546
32
6.10.2 Dimensions
6.10.3 Installation position
Generally, no special installation position for the device is prescribed as the internal components are mounted in a
vibration-resistant manner. However, the following installation positions are NOT advisable:

Connector side to the top :
This causes the danger of a condensate accumulation on the connectors, which in turn increases the risk of
corrosion.

Connector side to the bottom :
The water cooling circuit of the device has a U shape, which would now be upside down. In such case, the
ventilation of the cooling circuit is difficult, and the device may be cooled insufficiently.