manualshive.com logo in svg

Brunswick innova, Manual To Operations

Share
Download
Brunswick innova Manual To Operations Download Page 28

18 

Innova Ultra-Low Temperature Freezers 

Š

 M1288-0052 

User’s Guide 

 

 CAUTION! 

Hazardous voltages must not be connected to the remote alarm socket. 
Maximum rating is 24 volts, 1 amp. 

 

 

Figure 5:  Remote Alarm Socket—Chest & U101 Upright Freezers 

 
 
 
                               

 

 

1 

      
   
               

 

 

     3          2              

 
 
 

Figure 6:  Remote Alarm Socket—Upright Freezers (except U101) 

 
 
 
                               

 

 

  2                      

 
 

  

       
         1 

     3 

 
 

4.5 

Removal & Reinstallation 

 

Should it be necessary to relocate the freezer at any time, care should be taken 
when moving it.   
 
DO NOT tilt the freezer, and avoid giving the freezer any bumps or shocks as this 
can displace the hermetically sealed compressors from their suspension system.  
  

 

         CRUSH WARNING! 

These freezers are very heavy.  DO NOT attempt to lift any freezer by  
hand.  Always have a trained operator use mechanical lifting  
equipment. 

 

 
 
 

Summary of Contents for innova


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands