Bruno Independent Living Aids
ASL-700 OPERATOR 02-03-2022
7
OPERATION (continued)
Platform belts
• Press inner release tab down (Fig. 2).
• Push large orange tab UP (Figs. 3 and 4).
• Pull strap up and hook to mobility device docking
plate (“dog bone”).
• Press inner release tab and hold while pressing
large orange tab down to home position (Fig. 1).
NOTE: You will hear the tab click into its home
position. The strap will “auto ratchet” to
secure the mobility device on the ASL-700.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Unloading
• Open the keyswitch cover.
• Insert the key and turn it to the ON position.
• Press and hold the DOWN switch to lower the
platform/mobility device.
• Release switch when the platform reaches the ground.
• Loosen the belts pressing the inner release tab (see
Fig. 2 on previous page).
• Unhook the (3) retractable belts from the plate secured
to the bottom of the mobility device seat.
• Press and hold the UP switch to raise the platform. Keep
the platform in the down position (parallel with the
ground) until it makes contact with the rubber bumpers.
•
Fold platform.
• Turn the key to the OFF position.
• Close the keyswitch cover.
NOTE: When travelling with no mobility device on the platform,
Bruno recommends folding up the platform and
securing it using the outermost retractable belt to
prevent damage from bouncing (see left). However,
for increased fuel efficiency during highway driving,
you may travel with the platform folded down.
•
Use
outermost
belt to hook
onto belt keeper.
• Remove slack in belt.
See note to right.
securing folded platform
