brunneroutdoor.com
D - GB
Congratulations on the purchase of your new Sit2Go telescopic stool. You now have a high-quality aluminium
telescopic stool with very compact dimensions.
For optimal use - use the instruction manual!
Before using your Sit2Go and for optimal utilization, it is important to know about its possible uses and
applications. We therefore recommend that you read these operating instructions thoroughly. Reading this
manual will therefore save you time and unnecessary hassle.
If you come across this warning sign while reading this manual, please note that there may be a risk of
damage to the user or the device.
Setup:
Remove the aluminium frame and seat cover from the packing bag (Fig. 1).
Pull out the telescopic stool leg completely (4 elements must be visible) (Fig. 2). Important. Always
make sure that all elements are extended to the stop - and locked in place!
Fit the seat cover:
Position the support arms of the frame upwards and insert them into the corresponding corner pockets
on the underside of the seat cover as far as they will go (Fig. 3).
Please note:
The corner pocket with the attached pull tab must be the last to be fitted with the support
arm. The seat cover is pre-tensioned by gently pulling the pull tab.
Height adjustment (2 variants):
a) By adjusting the last segment (snap-in knob) - 3 adjustment options (Fig. 4)
b) By telescoping the individual elements - 2 adjustment options (Fig. 5)
Please note:
If variant b) is used, always press the snap-in knob right above the element you want to
telescope. Always make sure that the telescopic elements are firmly engaged.
Your Sit2Go telescopic stool is now ready for use.
Disassembly:
By pressing the upper snap-in knob (Fig. 6) while simultaneously pushing in all the telescopic elements,
the telescopic stool leg is brought back to its initial position.
Remove the seat cover from the frame. (Fig. 7)
Stow the frame and seat cover in the packing bag. (Fig. 8)
Sit2Go 2.0
