© 2017 Brunner GmbH
Operating Instructions (1.14)
7
1
CONTROLLER OPERATION
1.1 OVERVIEW OF USER INTERFACE
Your stove equipped with the electronic combustion control system EAS (ger.
E
lek-
tronische
A
bbrand
s
teuerung) is even more comfortable to use. No technical knowl-
edge is required to operate the system. The EAS control system optimizes the com-
bustion process and its quality, which means that the emissions are reduced to a
possible maximum.
A switching output is available for additional switching functions, as the automatic
switching of combustion gas flow (heat-up flap) or deactivation of a kitchen hood.
The relevant additional function has been selected and set up during commission-
ing by your stove building contractor.
In the following picture, you can see the EAS controller with the individual displays
and controls.
The main display function is to provide information about the current status of the
system. It shows the current temperatures and additional information about the sys-
tem. In addition, error messages are displayed in case of malfunction.
Always visible (except
Standby mode)
Displayed if necessary
