4
2 INSTALLATION INSTRUCTIONS
GENERAL
Open the box carefully and remove all packaging.
The following material is included:
1. CLS-E Yoke
2. USB Cable
3. Power supply with cable
4. This manual
MOUNTING & OPERATING CONDITION
1. The unit must be mounted with 4 Screws or 2 clamps
securely on a flat surface before operating.
2. Keep a minimum of 5 cm distance around the unit from
any part.
3. Keep environmental temperature below 40°C max.
4. Use only in dry environment.
FIRST START / ELECTRICAL CONNECTION
1. Connect the CLS-E Yoke with your computer via the
provided USB cable or Ethernet cable (not included).
2. Connect the power supply cable to the yoke.
3. The calibration and initialization sequence will start as
soon the “INIT” -Button on the display is clicked or CLS2Sim
software is running (if Auto-Init feature is enabled).
Axis are moving across their range.
DO NOT DISTURB THIS SEQUENZ UNTIL THE YOKE IS
CENTERED! THIS SEQUENCE IS REPEATED EVERY TIME
WHEN POWER IS APPLIED.
rear connections
mounting holes
O
5.5mm
rear connections
mounting holes
O
5.5mm
