Further information about assembly and care instructions
26 . 27
CARE INSTRUCTIONS
Careful and proper cleaning of the surfaces of your cellular table is particularly important to keep it in optimum condition
for as long as possible. The following cleaning instructions are only intended as a recommendation. Brunner GmbH will not
be held liable for damage to the finish caused by improper cleaning.
Cleaning the powder-coated steel tube frame
For normal use, it is sufficient to wipe the metal surfaces with a clean, dry dust
cloth. Any particularly dirty areas can be cleaned with a standard, grease-
dissolving all-purpose cleaner. Please only use soft cotton cloths for cleaning
purposes and never use plastic sponges, wire wool or steam jet devices, which
could permanently damage the surface. Never use abrasive cleaning agents or
toilet or sanitary cleaners. The gliders' surfaces should be regularly cleaned of
coarse pieces of dirt or deposits. External factors, such as weight and humidity,
can cause the gliders to wear out or slip. Coarse dirt and deposits should be
removed from them regularly. The usual level of care is required when replacing
the gliders.
Cleaning cover fabrics
Upholstered surfaces need regular care as they constantly come into contact with dust and dirt. In general, soiling should
not be allowed to build up too much or be left too long in order to avoid making cleaning more difficult and to extend the
life of the product.
Clean
fabric covers
from the Brunner standard range using an upholstery brush
or a vacuum cleaner attachment suitable for cleaning upholstered furniture.
Depending on the level of soiling, it may be advisable to use a soft, damp cloth
and a little detergent.
For more information about cleaning fabrics, see the fabric cards for the fabric
collection in question.
Please note that some dark fabrics can cause staining. The fabric colour of
clothing can be transferred onto the upholstery after coming into contact just
once. The result is a permanent, non-soluble stain.
Regularly remove dust and light soiling from
leather covers
using a dry or
slightly damp cloth. Gently rub dried-in dirt with a weak neutral soap solution
and a soft cloth. Afterwards, wipe over to dry and apply a suitable leather care
product while observing the manufacturer's instructions for use.
Do not use solvents, cleaning petrol, stain removers, spirit, shoe cream or the
like.
Imitation leather
is best cleaned using a clean, slightly damp chamois cloth.
Please note: Do not use care products for real leather. Resoiling often occurs
due to the use of conventional household detergents and cleaning agents.
When using cleaning agents, please observe the cleaning agent manufacturer's
instructions for use and always test the suitability of the cleaning agent on a
concealed area first to avoid discolouration or abrasion.