Brunetti MARANELLO BLACK TOP, Owner'S Manual, Page: 4 / 8

VOLUME of CLEAN sound. The sound
pressure increase according to the
setting of the control to reach a light
saturation of the final stage.
We suggest to experiment this function
with the help of the POWERLIMIT
switch on the rear panel
EQ controls CLEAN channel
Bass: 100Hz level
Mid: 1KHz level
Treble: 10KHz level
EQ conreols DRIVE &
OVERDRIVE channels
Bass: 150Hz level
Mid: 1KHz level
Treble: 8KHz level
Manual switch of channels
WARNING! To use the
footswitch this switch
must be on DR position
MASTER volume for DRIVE
and OVERDRIVE channels.
It balances the volume
of distorted channels
and Clean channel
GAIN DRIVE and OVERDRIVE
sounds. It allows to pass from
clean to distorted sounds together
with DR and OD switch control
STDBY MAIN
GAIN
DRIVE
IN
MARANELLO
BASS MID TREBLE MASTER VOLUME BASS MID TREBLE
CLEAN
DR
CL OD
Black
Top
5/20w
MARANELLO BLACK TOP is the result of the iconic MARANELLO evolution. Its three channels
CLEAN/DIRVE/OVERDRIVE configuration meets all music needs.
The CLEAN channel is very dynamic, warm and clear. It’s the clean sound that distinguishes
a
l
l of our products, perfect with stomp boxes and rack systems too.
The DRIVE channel comes from the need to create a sound link between CLEAN and OVERDRIVE emphasizing that it’s not enough
to lower the gain to obtain a good channel with half distortion and high definition. So we designed the channel which includes the
features of a good clean and could reach a dynamic saturation and not extreme. The third channel, OVERDRIVE, does not need to
be introduced and compared with the previous model shows a more fluid character without loss of gain and definition.
MARANELLO has been revised and retouched step by step, and deeply tested with many different guitars to give its best. The functions control is
simple and direct, it will be easy for you to find your sound! We suggest to set BASS, MID and TREBLE controls at noon and then set GAIN and VOLUME
of all channels. Every slight change in controls involves variations in timbre and dynamic response of your instrument. The switching of the channels
is manually operated by the three positions switch on the front panel with gree light (Clean), yellow light (Drive) and red light (Overdrive).
The two-coloured RED/GREEN light of MAIN and STANDBY is unchanged.
FRONT PANEL