S-Trap Installation for:
Back To Wall,
Back-Entry versions:
S-Trap Installation for:
Wall-Faced Pans
with Concealed Cistern:
Suits Models:
HARMONY10700
(Fig.1)
HARMONY10750
(Fig.2)
Suits Models:
HARMONY10800
(Fig.3)
HARMONY10850
(Fig.4)
1.
Lubricate the rubber at the end of the plastic trap
connector (using a water-based lubricant) and
position it firmly in the waste outlet.
2.
Fix the trap connector to the wall using the rod
and bracket.
3.
Align the pan with the trap connector, then push
it back firmly towards the wall so there is a firm
connection.
4.
Bolt the cistern to the pan, flush it with a bucket of
water to ensure there are no leaks.
5.
Flush the water line.
6.
Connect the water inlet valve using a 15mm
mini cistern stop. Fill the cistern and ensure
that water is at the correct level. Any minor
adjustments should be in line with the instructions
accompanying the inlet valve.
1.
Install the cistern in the wall as per the instructions
accompanying the concealed cistern. It is
important to adhere to the height and pressure
recommendations for the cistern.
2.
Set the flush pipe from the cistern at the
appropriate height to engage with the pan.
3.
Lubricate the rubber at the end of the plastic trap
connector (using a water-based lubricant) and
position it firmly in the waste outlet.
4.
Fix the trap connector to the wall using the rod
and bracket.
5.
Align the pan with the trap connector and flush
pipe, then carefully push the pan back towards the
wall so there is a firm connection of both the trap
connector and the flush pipe.
6.
Follow the instructions for filling and testing the
concealed cistern.
For further information, visit
www.harmonybathroomware.com.au
1.
Ensure the toilet suite is level and that the cistern
is square to the wall.
2.
Attach the cistern to the wall.
3.
Attach the seat according to the
separate instructions.
4.
Fix the pan to the floor using the screws and
caps provided.
5.
Silicone the suite to the floor and remove
any excess.
6.
Flush the toilet (both half flush and full flush)
to ensure it is functioning correctly.
1.
Attach the seat according to the
separate instructions.
2.
Fix the pan to the floor using the screws and
caps provided.
3.
Silicone the suite to the floor and remove
any excess.
4.
Flush the toilet (both half flush and full flush)
to ensure it is functioning correctly.
FINAL STEPS:
FINAL STEPS:
