16
Error detection
What if ...
... the stove doesn't draw properly?
•
Is the chimney or stove pipe
not tight?
•
Has the chimney been
measured correctly?
Are the cleaning flaps not
closed or not tight?
•
Is the ambient temperature
too high?
•
Is the door of another
fireplace which is connected
to this chimney open?
... the room doesn't get warm enough?
•
Are the heating requirements
too high - the appliance too
small?
•
The stove does not draw
properly.
•
Is the firewood too moist?
•
Has too little wood been
placed on the fire?
... the room gets too warm?
•
Is the supply pressure too
high?
•
Has too much wood been
placed on the fire?
... smoke escapes when adding fuel?
•
The firebox door was
opened too quickly.
•
The supply pressure is too
low.
•
The firewood has not burnt
down enough.
Observe the operating instructions!
