manualshive.com logo in svg

Bruker SampleXpress, User Manual, Page: 41 / 174

Share
Download
Bruker SampleXpress User Manual Download Page 41

41

Z31900_00_01

Design and Function

Sample Release Lever 

Each conveyor chain link has its own sample release lever (

Figure 5.11

/1) to hold the 

sample in place. This lever is pressed to its home position by a spring which is placed 
inside each conveyor chain link. Each conveyor chain link has a small hole (

Figure 5.11

/

2), into which the sample release lever (

Figure 5.11

/3) fits. When the conveyor chain link 

is positioned above the BST, the sample release lever is led through the opening in the 
conveyor chain link and thus releases the sample. The sample falls through the con-
veyor chain link into the magnet.

Figure 5.10 Base Unit

1.

Sample Release Lever

Figure 5.11 Conveyor Chain Link

1.

Lever of conveyor 
chain link

2.

Opening for sam-
ple release lever

3.

Sample release 
lever

Summary of Contents for SampleXpress















































































































































































Reviews:

No comments