Bruker BMPC/2, Technical Manual

Page: 44 / 136

44 Z31823_00_05
Voice Box System
The number of repetitions that the system will perform can be configured. For details on
the alarm cycle refer to the section "Alarm System" on page 39 .
7.2 Remote Status Request
It is possible to request a status report at any time from any place in the world via a
touch-tone phone. To do so:
1. Dial the telephone number from the BMPC/2 modem.
2. Wait for the message greeting.
3. When queried, press the star button.
4. Enter the requested authorization code (see
"Password & Codes" on page 97 ).
5. Press the star button.
You should then hear the actual status of the BMPC II. The program will then proceed to
the voice box menu.
7.2.1 Voice Box Menu
While in the main menu of the voice box system, you can select between four options
using the corresponding code:
•
Press ’0’ to leave the system.
• Press ’1’ to enter the fax menu.
• Press ’2’ to hear the system status once more.
• Press ’9’ to enter to the e-mail menu.
7.2.2 Fax Menu
There are 4 options available in the fax menu, accessible by pressing the corresponding
code number.
•
Press ’0’ to exit to the main menu.
• Press ’1’ to request a report fax for the last 24 hours (data log file).
• Press ’2’ to request a report fax for the last 7 days (data log file).
• Press ’3’ to request a report fax for a special period (data log file).
For option ’3’, enter the start and the stop date for the data you want to receive using the
date format dd/mm/yy (e.g. for May 11, 2009 enter 110509).