Bruker BMPC/2, Technical Manual

Page: 31 / 136

31 Z31823_00_05
Software
5.3.5 Present Values / Event Display
The Present Value/Event Display:
•
Provides a quick overview of how the system is configured,
• indicates whether there are any events which must be examined,
• or can be used to present the current data in a simple table representation.
Figure 5.12 Present Values / Event Display
The Events section of the displays all the warnings, alarms, system messages, as well
as, all error messages from the BMPC/2 Control Unit. The Event log filter buttons on the
upper part of the display allow you to select data that is relevant for your purposes.
The alarm configuration field in the Present Values block indicates which channels will
trigger an alarm when a malfunction occurs in Monitor & Alarm Mode (refer to "Monitor &
Alarm Mode" on page 33 ). More information on configuring alarms can be found in
"Alarm Configuration" on page 40 .
If you are logged in as a user or administrator, the display automatically will change to
the Present Values / Event mode every time a new entry is written in the Event log.
Events
Present Values
Event Log Filter
Alarm Configuration
Login Level Actual Mode System Status