Operating & Service Manual Version 002
BRUKER BIOSPIN
31 (53)
6
Servicing the BLA
6
The BLAH1000 E Amplifier 700-900MHz provides diagnosis and servicing web
pages relies on HTTP, allowing service access with any web browser.
Accessing the BLA Amplifier
6.1
The BLAH1000 E Amplifier 700-900MHz is accessible via the BLA control board
with its IP address.
The IP address is given during "
cf
" by using TOPSPIN 2.5x or better software on
the workstation.
In case of problems :
•
Check the RJ45 cabling between amplifier, Ethernet switch and workstation.
•
Check the Ethernet switch power.
•
Check if the green LED on the amplifier RJ45 connector lights up.
•
Check the front panel of the amplifier, LED's indi32V, +15V, -15V and
+3.3V ON must have lit.
To access the BLAH1000 E Amplifier 700-900MHz, type "
ha
" in TOPSPIN 2.5x or
better and choose the BLA that should be accessed or start your favourite web
browser and type the given IP address as URL.
Summary of Contents for BLAH1000 E
