ENGLISH OUS indications
Page 13 of 50
OTH-SEM-IFU-OUS-0359 Rev I
Charge the Provizio SEM Scanner before using it for the first time to at least four bars (five bars
is the maximum). Follow the steps below to charge the scanner:
1.
The Charging Hub is packaged with an
AC to DC wall adapter (Figure 5). The
adapter comes with several regional
pin
configurations.
Select
the
configuration suitable for your
institution, insert into the face of the
adapter and twist to the right.
A
“click” indicates that the pins are
inserted and locked.
2.
Check that the pins are locked by
gently turning to the left. The pins
should not disengage from the
adapter.
Figure 5 AC/DC Wall Adapter
3.
Insert the cylindrical connector of the
adapter into the back of the Charging
Hub.
4.
Plug the power adapter into the
power outlet.
5.
Check that the light on the front of
the Charging Hub is illuminated
orange.
Place the scanner into the Charging
Hub.
6.
Check that the light has started
flashing green. If the light is not
flashing green, then the Provizio SEM
Scanner may not be positioned in the
cradle correctly. Orange means an
error has occurred.
7.
When positioning the Charging Hub,
make sure the hub is placed in a way
that makes it difficult to disconnect
the Provizio SEM Scanner
Figure 6 Correct Positioning of the Provizio
SEM Scanner on the Charging Hub
