Page 16 of 20
█
© Brüel & Kjaer Vibro
● October 2017 ● C106635002 / V01
Technical alterations reserved!
EN
The correct functioning of the VIBROCONTROL 850 can only be guaranteed by the
manufacturer if accessories designed for and delivered with or approved/certified by the
manufacturer Brüel & Kjær Vibro are used together with this device.
The VIBROCONTROL 850 has no internal forced ventilation. These devices
have no external ventilation requirements as long as the surface temperature during
operation does not exceed the maximum ambient temperature value Ta.
If the VIBROCONTROL 850 is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired. The safety of any machine/system
incorporating the VIBROCONTROL 850 device is the sole responsibility of the assembler of
the system
5
Cable Connections
The cable that is attached to the VIBROCONTROL 850 is made of PUR, i.e. an oil resistant type. It is
single-shielded; it has a default length of 5 meters and has at the other end 12 open-ended wires. The
meaning of each wire and their colors in the standard configuration are specified below.
5.1
Standard Cable Configuration
Colour
Function
Red
+ 24 V
Black
GND
Red / Blue
Danger, relay
White
Danger, relay
Purple
Alert relay
Blue
Alert relay
Green
Self test
Yellow
Latch alarms
Pink
4-20 mA
Grey
No Connection
Brown
No connection
Grey / Pink
No Connection
Screen
House
Summary of Contents for VIBROCONTROL 850
Page 21: ......
