14
SNUG-manual-EN-1-6 July 2019
your feet on the speedbar and legs fully extended, the riser pulleys should touch.
Ensure the accelerator line does not run through the reserve handle. The accelerator line should run inside the tube
just above the reserve handle.
Attachment to the Wing
Attach the wing’s risers to the karabiners at the main suspension points. The A-risers should face forwards. Attach
the brummel hooks of the speedbar to those on the paraglider’s risers.
Pre-flight checks
We recommend performing the following pre-flight checks before every flight.
• Check the karabiners, and make sure that the twist-lock system closes them automatically.
• Check the harness buckles. They should lock automatically.
• Check that the reserve handle and the plastic rods are in the correct position.
• Ensure that there are no twists in the lines and risers that connect the harness to the glider.
• Check chest, side and shoulder strap adjustments.
• Ensure that all buckles are locked.
Use
