LDSBus Isolated IO Controller Datasheet
Version 1.1
Document Reference No.: BRTSYS_000009 Clearance No.: BRTSYS#005
Copyright © BRT Systems Pte Ltd
8
7
Terminal Wiring Instructions
Terminal blocks are connected with screws. To clamp the wire to the terminal block, insert a
0.4mm x 2.5mm slotted screwdriver and rotate in a clockwise direction. To release the wire, turn
the handle in an anticlockwise direction.
Figure 5 - Clamping wire with screwdriver in clockwise direction
Table 2 provides a list of American Wire Gauges (AWGs) that can be used in Terminal Blocks.
Conductor Type
Wire dimeter/AWG
Solid conductor
0.2~1.5mm
2
/26~16 AWG
Stranded conductor
0.2~1.5mm
2
/26~16 AWG
Stranded conductor; with insulated ferrule 0.25~0.75mm
2
Table 2 - AWG to use in terminal block
As shown in Figure 6, the wire strip is 3mm to 5mm long.
Figure 6 - 3mm to 5mm wire strip
3mm ~ 5mm