• 14 •
487802781
PROBLEM
POSSIBLE CAUSE
REASON/SOLUTION
I cannot select a 6V
or 12V setting.
The charger is equipped
with Auto Voltage Detection,
which automatically detects
the voltage and charges the
battery.
No problem; this is normal.
Green LED is solid
and the display
shows ANALYZING
BATTERY.
The charger needs to check
the condition of the battery.
The Green LED will be solid
when the charger is checking
the condition of the battery.
This is normal.
Green LED is flashing
and the display shows
CHARGE ABORTED-
BAD BATTERY.
The battery is sulfated.
The battery is too large for
the charger.
Reset the charger by briefly
unplugging it.
You need a charger with a
higher amp rate.
The display shows
CONNECT CLAMPS.
The clamps are not making a
good connection.
The fuse is bad.
Check for poor connection at
battery and frame.
Replace the in-line fuse for
the ring connector.
16. SPECIFICATIONS
Input Voltage ................................................................120V AC @ 60Hz, 0.91A
Output Voltage .......................................6V or 12V, with Auto Voltage Detection
Output Current Rating ..........................................................2A @ 6V; 3A @12V
