BRP Can-Am DS 450 EFI 2009, Predelivery Bulletin, Page: 3 / 19

PARTS TO BE INSTALLED
UNCRATING
WARNING
Never stand at front or at rear of the vehicle
while straps are being cut.
NOTICE Allowing the crate to drop may cause
serious damages to vehicle.
NOTICE While manipulating to cut, take care
not to damage trim components with blade.
NOTICE Never tip cover toward the front or
rear of the vehicle while lifting it.
NOTE:
Screws that are used are Robertson † #2
type that require the use of an appropriate bit
(Scrulox #2 from Snap-on
†† Tools or ECAR.1 from
Facom ††† Tools).
1. Carefully lay the crate on its bottom.
2. Remove all screws retaining crate cover to
crate base.
3. Assisted by another person, lift up crate cover.
4. Raise cover vertically from both ends at the
same time.
2
2
1
1. Screw
2. Lift up crate cover
5. Remove protective wrapping from the vehicle.
6. Remove boxes from crate base.
7. Remove parts and equipments from crate
base.
8. Remove straps, hooks and brackets retaining
vehicle to crate base.
9. Move vehicle out of the crate base.
10. Ensure that the crate includes the following
items:
All Models except CE
ITEM DESCRIPTION QTY
1 First oil change kit 1
CE Models
ITEM DESCRIPTION QTY
1
First oil change kit
1
2 Mirror kit 1
3 Vehicle lock kit 1
NOTE:
This vehicle comes with a hang tag and la-
bels containing important safety information. Do
not remove hang tag from vehicle, they are consid-
ered permanent parts of the vehicle.
PARTS TO BE INSTALLED
Battery
WARNING
Always connect RED positive cable first and
then BLACK negative cable.
CAUTION
Never charge or boost battery
while installed on vehicle.
NOTICE Always charge battery before its in-
stallation on the vehicle.
NOTICE Make sure not to squeeze battery ca-
bles between vehicle components.
Battery Installation
1. Refer to the latest edition of CAN-AM ATV BAT-
TERIES SERVICE BULLETIN NO. 2009-1 for
proper activating, charging and maintenance
procedures.
2. Remove seat from vehicle.
† Robertson is a registered trademark of Robertson Inc.
†† Snap-on is a trademark of Snap-on Inc.
††† FACOM is a brand of the International tools Group, subsidiary of FIMALAC.
PREDELIVERY 2009-5 3 / 19