BRP Can-Am Defender DPS HD10, Operator'S Manual

Page: 136 / 244

134
3. Gently shake off excess water and
allow filter to dry at room
temperature.
4. Clean inside the CVT air inlet with
a vacuum cleaner.
IIn nsstta alllliin ng g tth he e C CV VT T A Aiirr F Fiilltte err
1. Reinstall CVT air filter.
2. Lower and lock the cargo box.
E Evva ap po orra attiivve e E Em miissssiio on n
S Syysstte em m P Prre e--F Fiilltte err ((IIff
E Eq qu uiip pp pe ed d))
E Evva ap po orra attiivve e E Em miissssiio on n S Syysstte em m
P Prre e--F Fiilltte err R Re ep plla acce em me en ntt
1. Tilt the cargo box.
2. Remove the hose clamps.
3. Remove the retaining screws.
4. Remove the pre-filter assembly.
1. Pre-Filter
2. Retaining screw
3. Clamps
5. Install a new pre-filter assembly.
T Tiig gh htte en niin ng g T To orrq qu ue e
Pre-filter
retaining
screw
2.5 ± 0.5 Nm
(22 ± 4 lbf-in)
6. Secure hoses with clamps.
7. Install all other removed parts.
E En ng giin ne e O Oiill
R Re ecco om mm me en nd de ed d E En ng giin ne e O Oiill
Rotax ® engines were developed and
validated using the XPS™ oil.
BRP recommends the use of its XPS
engine oil or an equivalent at all time.
Damages caused by the use of an oil
not suitable for the engine may not be
covered by the BRP Limited Warranty.
1. XPS recommended engine oil
General
purpose
XPS 4T 5W40
synthetic blend oil
Cold
temperature
XPS 4T 0W40
synthetic oil
Warm
temperature
XPS 4T 10W50
synthetic oil
If the recommended XPS engine
oil is not available:
–
Use a 4-stroke SAE engine oil
meeting or exceeding the fol-
lowing lubricant industry
specifications.
– Always check the API service
label certification on the oil con-
tainer, it must contain at least
one of the indicated standards.
–
A AP PII sse errvviicce e cclla assssiiffiicca attiio on n
S SJJ,, S SL L,, S SM M o orr S SN N
MAINTENANCE PROCEDURES