background image

WARNINGS 

 

CLEANING AND MAINTENANCE 

 

 

 

 

 

 

 

 

 

 

2

KEEP ALL FLAME AND HEAT SOURCES AWAY FROM CANOPY FABRIC

The canopy is made with flame-resistant fabric which meets CPAI-84 specifications. It is not 
fireproof. The canopy fabric will burn if left in continuous contact with flame source. The application 
of any foreign substance to the canopy fabric may render the flame-resistant properties ineffective.

* Determine you have adequate space for assembly (1.83m or 6ft.) from any obstruction, including 
  buildings, tree limbs, and electrical wires.
* Assembly by four adults is recommended
* Keep children away during assembly.  This item contains small parts which can be swallowed by 
  children.  Children should always be under adult supervision while using this product.
* Always inspect the swing during each use for any obstructions.
* Remove the canopy in heavy wind conditions to avoid tipping over and damage to the swing.
* Do not discard any of the packaging until you have checked that you have all the parts and fittings.
* Retain the assembly instructions for future reference.
* The manufacturer will not accept responsibility for unauthorized repairs or modifications to 
   this product.
* Weight limit is 750lbs.
* This product is for residential use only, not for commercial use.

CAUTION:BEFORE YOU BEGIN ASSEMBLY

* Annually:
       * Check all nuts and bolts for tightness each season and more often if used frequently.
       * Oil all metal moving parts with a general purpose lubricating oil to ensure proper performance 
         and safety.
* To clean, wash frame and fabric with mild soap and water; rinse thoroughly.  Dry frame completely 
   and allow the fabric to drip dry away from direct sunlight.
* Do not use bleach, acid, or other solvents on the fabric or frame parts.
* To prolong the life of your swing we recommend storage in a dry area when not in use or during 
  austere weather conditions.

Summary of Contents for Biltmore SC-K-454PGSND









Reviews: