background image

SAFETY INFORMATION

Before you assemble or operate this unit, please carefully read this entire manual. Failure to

do so may result in a fire explosion, injury, or death.

WARNING

• The installation of this unit must adhere to local codes or either the National Fuel Gas Code, ANSI Z223. 1/

NFPA54, OR CAN/CGA-B149.1, National gas and Propane Installation Code.

• THIS UNIT IS INTENDED FOR OUTDOOR USE ONLY! This product shall be used outdoors, in a ventilated space

 

and shall not be used in any enclosed area.

• This unit is to be used with propane gas only!

• Do not attach a remote gas supply to this unit.

• This unit is not intended for natural gas.

• Converting this unit to natural gas is dangerous and not recommended. The conversion of this unit will void

 

the manufacturer warranty.

• Do not use any solid fuel or charcoal with this unit.

• When igniting this unit, stay away from the burner as the flame may light up and may cause injury.

• If the propane gas tank is leaking gas, you may hear, see, or smell a hiss. Do the following: 1. Disconnect the

 

propane gas tank. 2. Do not attempt to fix the problem yourself. 3. Contact your gas supplier or fire

 

department for help.

• Applying too much propane may result in gas pooling and will not burn. Allow fresh air into the unit so that

 

the remaininggasmayescape.

• Do not use a flame to check for gas leaks.

• Gas supply

the manifold pressure “__11_ in wc (_2.74_ kPa).”

• Use LP propane tanks with the following dimensions: diameter 12in, height 18in, capacity 20lbs.

• You must use a propane tank that has a collar to protect the gas valve.

• DO NOT fill one lb's tank over 80 percent full.
• Discontinue use if any part of the propane tank is damaged. Rust and dents may be hazardous and

 

should

be inspected by a gas supplier.

• Do not burn anything other than the provided materials for this fire table.

• Do not operate unit until all parts are fully assembled.

• Do not paint or color any part of this heating unit.

• Unit may be hot while in use, do not attempt to move it while in use.

• Neverleavethisheatingunitunattendedwhileinuse.

• This unit is not intended for cooking.

• Keep any flammable items away and do not use any other fireplace cover for this unit.

• Keep a safe distance to avoid burning skin or clothing.

• Do not sit or rest hands or feet on this heating unit.

• Never place hands or fingers on upper portion of this unit while in use.

• Keep all electrical cords and fuel supply hose away from heated surfaces.

8

Summary of Contents for 19524













Reviews: