1.0 Introduction
Congratulations on your purchase of a new Browns machine. In order to correctly
use the machine please carefully read this manual. The manual has been written to
provide operating and maintenance procedures and related safety information which
will allow you to use and maintain this machine in a correct and safe manner.
This operators manual should be regarded as part of the machine. You must en-
sure that you and anyone else who is operating, maintaining or working with the ma-
chine be familiar with the operating and maintenance procedures and related safety
information contained in this manual.
Owners must give operating instructions to operators or employees before allowing
them to operate this machine. It is the operators responsibility to read and under-
stand all safety and operating instructions in this manual. Remember all accidents
can be avoided.
A person who has not read and understood all operating and safety instructions is
not qualified to operate the machine. An untrained operator exposes themselves
and bystanders to possible serious injury or death.
Caution
This symbol indicates important safety messages in this manual. When you
see this symbol, be alert to the possibility of injury to yourself or others, and
carefully read the message that follows.
The most important safety device on the machine is a
safe operator
1.1 General Information
The illustrations and data used in this manual were current at the time of printing,
but due to possible engineering or production changes, this product may vary slight-
ly in detail. Browns reserves the right to redesign or change components as may be
necessary without notification to anyone.
No liability can be accepted for inaccuracies or omissions in this manual, although
every possible care has been taken to make it as complete and accurate as possi-
ble.
Throughout this manual, references may be made to,
LEFT-HAND SIDE
- the side which is on the left only when an observer is
facing in the normal forward direction of travel of the machine, i.e. the operator
looking forward from rear of machine.
RIGHT-HAND SIDE - the side which is on the right only when an observer is
facing in the normal forward direction of travel of the machine.
COMPETENT PERSON - for any task means a person who has acquired
through training, qualifications or experience, or a combination of them, the
knowledge and skills to carry out that task.
2
Summary of Contents for BALE HANDLER
Page 2: ......