Now you can input this number into the filament tracker. Since the BB023 has only one button, the
numbers on the display will increase every 2 seconds. When the number you want is displayed, press
the button. The cursor will move to the next digit and the number will increase every 2 seconds. Press
the button when the number you want is displayed. Do this for all numbers. This is also the way to select
the spool number. At the top left of the screen a number will be displayed, from 0 to 9, and will increase
every 2 seconds. This represents the spool. Press the button to select that spool. If there are less than 10
spools in memory, the numbers will stop at the last stored spool and 2 seconds later a small ‘N’ will be
displayed at the top right of the screen. This stands for New spool. While the N is displayed press the
button if you want to input a new spool.
It’s a good idea to label the spool with the same number that you chose for that spool in the BB023
filament tracker.
To edit the length of a stored spool, turn on the BB023 and select the spool you want to edit. Press the
button again for editing. The screen will flash, now press the button again to start entering the length,
one digit at a time. To skip a digit, simply press the button within 2 seconds. If you wait too long you will