13
Motion Test
Your trail camera is equipped with a MOTION
TEST feature. This feature helps you aim the
camera at your target area. With the motion
test turned on, simply walk around in your
target area. When your presence is detected,
a red LED on the front of the camera will
flash. Simply press the OK button, the red
LED will flash when motion is detected.
Make sure you turn OFF the MOTION TEST
function before leaving the camera in the
field by pressing the OK button.
Press the DOWN arrow to proceed to the next setting.
Motion Test
Off
Camera Name
Camera1
You can add a custom name for your camera
if needed. To name your camera, Press the
OK button once. This will highlight the first
character in the camera name. Use the UP
and DOWN arrows to change the field. Press
the RIGHT ARROW button to move to the next
letter. Your available characters are Capital
A-Z, 0-9 or a blank space. When finished,
press the ENTER key to save your selection.
Camera Name
