Brownie’s THIRD LUNG F280X, Owner'S Manual, Page: 7 / 24

1. Lift Velco

flap on the side of the
tube cover.
2. Turn the valve cover counter-
clockwise exposing the valve. 3. Insert the inflation nozzle into the
valve and turn clockwise to lock.
4. Located at the end of the black
heat hose is a male QRS fitting
which fits snugly into the clear tube.
With the compressor running, insert
the male QRS fitting into the clear
tube and begin filling.
5. At about halfway through the filling
process, check to see that the tube
is positioned uniformly in the cover.
Fill until tube is firm to the touch, but
avoid overfilling. Shut off engine by
turning kill switch to “Off.”
6. Press fabric cover back into place
and clip the inflation nozzle onto
available D-ring.
7. Deflation is very quick and easy.
Remove the valve cover by turn-
ing counter clockwise and simply
depress the quick-deflate button in
the center of the valve. You may also
lock the valve open by depressing
the quick-deflate button and turning
it clockwise. Replace valve cap, turn
clockwise to secure. Press fabric
cover back into place. Turn engine
off until you are ready to launch the
unit.
STEP 4
THE TUBE INFLATION AND DEFLATION
STEP 3
STARTINg THE UNIT
Serious burns may resulting from touching hot surfaces of the Engine. Please read the Engine Owner’s Manual.
1. Make sure the oil reservoir and gas tanks are full. Refer to your Engine Owner’s Manual.
2. Put the fuel switch in the “ON” position.
3. Turn the kill switch to “ON.” Start the engine.
4. If it is cold, it might be necessary to choke it. As it warms, return the choke to the open position.
7