Appendix. Configuration Command
Port
204
Appx. 1 Payload
Bytes
0
1
2
Field
Cmd
Config
Cmd
Command
1 byte
Bit [7:0]
0x00 – Set update event interval when the sensor is moving.
default value : 30 sec
0x01 – Set keep alive interval when the sensor is in stationary
mode.
default value : 7200 sec
0x02 – Set g-sensor timeout interval when the sensor is moving.
default value : 60 sec
Config
Configuration
0 or 2 bytes
Bits [15:0] unsigned value in seconds, range 15 – 65,535.
*Note: little-endian format.
© 2019 Browan Communications Inc. All rights reserved.
12
