Brouwer MARK 2, Owner/Operator'S Manual & Illustrated Parts List

Page: 12 / 40

4 - 1
OPERATION section 4
Operating Precautions
To prevent possible bodily injury;
•
Place all controls in disengage position prior to
starting engine.
•
Check that the throttle control operates
smoothly. Failure to do so may result in the
machine becoming out of control.
•
Do not place hands or feet beneath machine at
any time.
•
Do not operate equipment without
shields/guards in place. Do not make any
adjustments or perform any maintenance while
the engine is running.
•
Never start or run the engine indoors where
exhaust fumes can collect. Carbon monoxide
which is present in the exhaust fumes is an
odorless deadly gas. Maintain adequate
ventilation and fresh air to prevent carbon
monoxide build up.
•
Always stop the engine and allow it to cool off
when refueling.
•
Any warning decal that becomes illegible should
be replaced immediately.
•
If a malfunction occurs, cease operation and
stop the engine. Do not operate the machine
until the faulty condition is corrected.
Drawing 2
Starting Engine
See Drawing 2. Refer to engine manufacturer
owner's manual. Check gas flow valve (1) is in “ON”
position. Turn ignition start switch (2) to “ON”
position.
Drawing 3
Starting Engine
See Drawing 3. Position unit on kickstand and pull
smoothly and firmly on starting cord (1). Allow the
engine to warm up before operating machine. If
engine fails to start refer to the engine manufacturer
owner's manual.