WARNINGS
These instructions should be read by:
The specifying engineer.
The installation engineer.
The user.
The service engineer.
Failure to follow these instructions may result in risk of
•
personal injury or damage to the equipment.
Damage due to a failure to follow these instructions will
•
invalidate the warranty.
The appliance must be serviced by qualified engineers
•
in compliance with local regulations.
The appliance must be switched off and disconnected from
•
the power supply before any work is carried out.
There are no user controls inside the appliance casing.
•
Do not place anything on top of the appliance.
•
An air gap of at least 300mm should be allowed at the front
•
and rear of the unit to ensure a clear airflow.
Do not disconnect the appliance from the supply under load.
•
For internal use only. Do not use out of doors.
•
Extension cables should be correctly rated for the load,fully
•
unwound and never run through water or over sharp edges.
Always transport and store in an upright position.
•
Maximum operating temperature 35 C.
•
Minimum operating temperature 21 C.
•
Specifications:
The MCM230 is a Mono-block portable air conditioning unit.
It is connected to a 13 Amp. 230Vac. 50Hz power supply and comes fitted with a fused
uk moulded plug.
It is recommended that the supply to the machine should be protected by a 30mA RCD
PDF created with pdfFactory trial version
