background image

 

Toner that doesn’t cost the earth

 

Printed on recycled paper, using refilled cartridges 

© Zinetic.co.uk. All Rights Reserved 

   

 

 

Correct Position 

 

 

 

Make sure the black arrow on the cover is aligned with the white arrow marked #3 on the TN2010 gear. 

 

Safety information:  

Toner powder should be treated as a nuisance dust. Not to be used by children.  Avoid 

inhalation. Avoid eye & skin contact. Do not ingest. Inhalation: slight irritation of respiratory tract. Consult a 
doctor. Eye contact: Dust may cause irritation by mechanical abrasion. Consult a doctor. Skin contact: wash 
with soap and cold running water. Ingestion: No known hazard. Carcinogenicity: N/A, Mutagenicity: AMES test 
negative.  

 

All safety information is given to help facilitate the safe use of this product and is based on information 
obtained from the manufacturer. This information is believed to be correct, but does not purport to be all 
inclusive and should be used only as a guide. Zinetic makes no warranty, express or Implied as to the 
accuracy or completeness of this information. It is the users responsibility to determine the suitability of this 
information for the adoption of necessary safety precautions and or compliance with local laws/regulations. 

Zinetic is not associated with or endorsed by any of the cartridge / printer manufacturers referred to in any of 
our published works. Names of manufacturers, machines and part numbers are given as an aid to 
identification only. Names of manufacturers, machines and part numbers may be trade marks of the 
respective manufacturer. All Trade Marks hereby expressly acknowledged. 

Summary of Contents for TN 2010






Reviews: