X
Error message
X
What to do when...
Troubleshooting
Message
Cause / Remedy
Low
Battery!
The batteries are weak.
If using AAA alkaline batteries: Replace them
with new ones.
If using Ni-MH batteries, charge them fully.
Battery
Dead
The installed batteries are running low.
Invalid!
7='
selected [
Numbering
].
is selected for [
Numbering
].
}
Tab Length
]
or [
Label Length
].
# '
length while using the Deco Mode or Name
Label function.
No Text!
= '
data stored in the memory.
'=
}
Numbering
], [
Mirror
],
7=L''=
''='
entered while using the Deco Mode or Name
Label function.
Line Limit!
_
'' =
' E?_`_@%EM_`Y%
installed. Install tape of a larger size.
No
Cassette!
There is no cassette installed.
Cutter
Error
77$&'
middle of the printing process.
Text Full!
7=[E
@E+
)& %
entered.
Text Limit!
When using Deco Mode or Name Label
templates:
Since the number of entered characters
= =
In general:
Since the number of entered characters
= =
select [
Auto
] as the label length.
No Frame OK?
LE?_`_@%'
Frame setting ON.
^
'H
to cancel.
OK to Feed?
H'}
Chain
] is selected. Refer to the
Setting
Margin
section in this guide.
Insert
0.47"
9 E\q`?M%
for Deco Mode or Name Label templates.
Wrong Tape!
6'
Problem
Solution
The display
stays blank
turned on the
label maker.
$
inserted.
'
$#
connected.
When the label
is printed out,
there is too
much margin
%
=
Setting Margin
section in this
guide and select [
Half
] or [
Narrow
smaller margins for your label.
The label
maker does not
print, or the
printed
characters are
not formed
properly.
$
inserted correctly.
$$$
correctly.
The setting has
cleared on its
own.
7'
'
=
&6
settings will also be cleared.
A blank
horizontal line
appears
through the
printed label.
7
' 'L/'
an up-and-down motion.
The label
maker has
nothing
happens when
a key is
though the label
%
Resetting the PT-D201CS
section in this guide.
The power
turns off when
you try to print.
7'
$
inserted.
7'#$#
#*M\>^"#*M\>^#"#*M\>^#"
#*M\>^#*E?"#*M\>^#*E?#$#
The tape does
not feed properly
or the tape gets
stuck inside the
label maker.
$
the tape guides.
77$&'
7$&
during printing.
# =
format settings
need to be
cleared to create
a new label.
L
[
Text&Format
].
To change
language
setting.
Initial Settings
section in this
guide.