Brother Quattro 2 6700D Operation Manual Download Page 162

Page: 162 / 376

SELECTING STITCH PATTERNS

160

Select the correct character.

■

Adjusting the Character Spacing

The space between the characters can be adjusted.

Press .

→

The character spacing window appears.

Press

to adjust character spacing.

Press

to increase the character spacing and

press

to decrease the character spacing.

Example:

Each setting equals a specific distance between
characters.

Value

0.18

0.36

0.54

0.72

0.9

1.08

1.26

1.44

1.62

1.8

Memo

• The default setting is “0”. No number less

than “0” can be set.

• Changing character spacing by this method,

pertains to all characters. Spacing changes
are valid not only while entering characters
but also before and after the entering of
characters.

Summary of Contents for Quattro 2 6700D

























































































































































































































































































































































































Search results

Summary of Contents for Quattro 2 6700D

Reviews:

Brother Quattro 2 6700D, Operation Manual, Page: 162 / 376

Search results

Summary of Contents for Quattro 2 6700D

Reviews: