Brother PT-9200PC, Service Manual, Page: 57 / 93

II - 45
PT99007
(3) Place the bottom cover on the body cover and the front cover to reassemble
them.
Press the bottom cover against the body cover vertically and horizontally until
the four hooks inside the body cover click.
(4) Tighten screws “C” and “D” securing the bottom cover.
Pull out the (large) core from the storage space, and tighten screw “E”.
Core
Screw “E”
Body cover
Screw “D”
Screw “C”
Screw “E”
Core
Body cover
Fig. 2.2-61 Reassembly of the Body Cover and the Bottom Cover
(5) Tighten screws “A” and “B” to secure shield plate B and the ground wire on
the half frame.
Screw “A”
Screw “B”
Ground wire
Shield plate B
Half frame
Fig. 2.2-62 Tightening the Screw to Secure the Ground Wire