II
- 30
(5) Turn the body cover upside down.
(6) While pushing the cassette cover arms outwards, set the cassette cover brackets
into place, each at one time.
Fig. 2.2-31 Setting the Cassette Cover Brackets
(7) Set the cover open spring to the right-hand cassette cover bracket. Hook short end
"a" of the spring on the bracket and long end "b" on the cassette cover arm as
shown below.
(8) Secure the cassette cover brackets with the four screws.
Fig. 2.2-32 Setting the Cover Open Spring and Securing the Cassette Cover Brackets
Summary of Contents for PT-2500PC
