IV - 4
If this message appears on the computer
screen:
Do this:
Communication error between PC and P-
touch.
(1) Check that the P-touch is connected to your
computer with the USB interface cable (that comes
with the P-touch). Also check the cable for weak
connection.
(2) Make sure that the P-touch is turned on. If any
communications error has occurred, turn the
P-touch off and then on.
(3) If more than one P-touch is connected to your
computer via the USB interface, then you need to
choose the correct printer port specifying the model
name and serial number (e.g., "PTUSB(PT-2420PC-
xxxxxxxxx):"), instead of the default printer port
"PTUSB:." Where, xxxxxxxxx is a serial number.
NOTE: More than one P-touch may be connected to
your computer, but only one P-touch may print
at one time.
Communication error in the P-touch.
Delete the current job and then start the Change Baud
Rate wizard.
Not enough memory to print document.
Wait until any other application(s) is finished and then
try to print again.
Not enough disk space to spool document.
Ensure sufficient disk space.
Invalid port was specified.
Choose a valid printer port and try to print again.
Port being used for another application.
Wait until any other application(s) is finished and then
try to print again.
If this error persists,
- A communication application (e.g., mail application)
that uses the same I/O port as the P-touch may be
running. With the P-touch being connected to your
computer, restart your computer.
- Check whether the same port is selected by more
than one P-touch.
Cooling. Please wait a while.
The P-touch is cooling down the print head. Wait a
while.
The P-touch is being used. After waiting a
short while, click the Resume button in the P-
touch monitor.
The machine is occupied with any other job. Wait a
while and then click the Resume button in the P-touch
Monitor.
Error of unknown cause occurred.
An unexpected error has occurred.
Make a copy of the Fault Report, fill it in, and fax it to
your service representative.
Summary of Contents for PT-2420PC
