CONTENTS
Accessories
Names of
Parts
Before You
Begin
Changing
Needles and
Light Bulb
Threading
Stitch
Samples and
Needle Chart
Changing
Presser Feet
Basic
Sewing
Caring for
Your
Machine
Trouble
Shooting
7
Threading (1)
Note
Do not move bobbin stop while machine is running.
Bobbin Winding
1
2
3
1
Put spool of thread on spool pin.
✽
Use spool cushion when using cross
wound thread.
✽
Use spool cap when using parallel-
wound thread.
2
Lift thread guide bar all the way up,
and run thread through triangular
thread guide as shown in drawing.
3
Run thread through bobbin winding
thread guide as shown in drawing.
4
Run thread through top thread notch
1, and align bottom thread notch 2
with guide pin on bobbin winder
shaft.
5
Press bobbin stop up against empty
bobbin. If the bobbin stop does not
slide easily between the top and bot-
tom of the bobbin, check that the bob-
bin is seated properly with the guide
pin (
4
) inserted into the lower notch.
Spool Cushion
1
2
Bobbin
Bobbin Winder
Shaft
Guide Pin
Thread Notch 1
Thread Notch 2
Bobbin Stop
Spool Cap
Spool of Thread
4
-
9
: See following illustrations.
