manualshive.com logo in svg

Brother PJ-522 - PocketJet3 B/W Direct Thermal Printer, User Manual

Share
Download
Brother PJ-522 - PocketJet3 B/W Direct Thermal Printer User Manual Download Page 41

Page 37

Charging the  Battery

NOTE:

  

Batteries are shipped from the factory uncharged.  Brother recommends that  

 

a complete charging cycle (following steps 1 through 3 below) be completed

   

before using the battery for the 

fi

 rst time.

1. Make sure the printer is connected to an AC  power outlet with the AC  adapter and 

power cord or a DC power cord.

2. Make sure the printer is off.

3. Press the main switch and hold it down for a few seconds until the POWER indicator 

light begins to blink.  This puts the printer in Charge  Mode and starts the charging of 
the battery.

The POWER indicator light blinks until charging is complete.

The maximum time to charge to 100% capacity is approximately 120 minutes.  A new 

battery at 100% charge will yield approximately 70 pages of printing.

When the printer 

fi

 nishes charging the battery, it automatically turns itself off, and the 

POWER indicator light goes off.

Note that when the printer is connected to an external source of power, it will 

constantly draw approximately 20 mA to trickle charge the battery.

Stopping the Charge  Process

If you want to stop the printer while it is in Charge mode, press the main switch 
twice quickly.

Summary of Contents for PJ-522 - PocketJet3 B/W Direct Thermal Printer



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands