Brother p900w User Manual Download Page 173

Page: 173 / 238

Troubleshooting

163

Checking the Operation of Network Devices

Version Information

Problem

Solution

Your P-touch Label Printer and
wireless access point/router are not
turned on

Make sure you have performed all of the tasks on page 155.

I do not know my P-touch Label
Printer network settings, such as the
IP address

Check the Printer Setting Tool (see

Changing the P-touch Label Printer

Settings

on page 26).

Problem

Solution

I do not know the version number of
the firmware for the P-touch Label
Printer.

You can use the following procedure.

1 Turn your P-touch Label Printer on.

2 Press and hold the

(Feed&Cut) button for more than 10 seconds to print

the report.

(Use 0.94" (24 mm) or 1.4" (36 mm) tape.)

I want to confirm whether I am using
the latest version of the software.

Use the P-touch Update Software to confirm if you have the latest version or
not.

See the User’s Guide for more information about the P-touch Update Software.

Summary of Contents for p900w















































































































































































































































Search results

Summary of Contents for p900w

Reviews:

Related manuals for p900w

Brands by name

Popular brands

Brother p900w, User Manual

Search results

Summary of Contents for p900w

Reviews:

Related manuals for p900w

Brands by name

Popular brands