background image

Follow these guidelines to avoid the risk of fire, burns, injury, electric 
shocks, rupture, overheating, abnormal odors or smoke.

• Always use the specified voltage and the included AC adapter (AD-E001) for the 

P-touch labeler to prevent any damage or failure.

• Do not touch the P-touch labeler during a lightning storm.

• Do not use the P-touch labeler/AC adapter in places of high humidity such as 

bathrooms.

• Do not overload the power cord.

• Do not place heavy objects on, or damage the P-touch labeler, power cord or plug. 

Do not forcibly bend or pull the power cord. Always hold the AC adapter when 

disconnecting from the power outlet.

• Make sure that the plug is fully inserted in the power outlet. Do not use an outlet that 

is loose.

• Do not allow the P-touch labeler/AC adapter/power plug/batteries to get wet, for 

example, by handling them with wet hands or spilling beverages on to them.

• Do not disassemble or modify the P-touch labeler/AC adapter/batteries.

• Do not allow a metal object to contact both the plus and minus ends of a battery.

• Do not use sharp objects, such as tweezers or a metallic pen, to change the 

batteries.

• Do not throw the batteries into fire or expose to heat.

• Disconnect the AC adapter, remove batteries immediately and stop using the 

P-touch labeler if you notice abnormal odor, heat, discoloration, deformation or 

anything unusual while using or storing it.

• Do not use a damaged or leaking battery as the fluid may get on your hands.

• Do not use a deformed or leaking battery or one whose label is damaged. There is 

a possibility of damaging the P-touch labeler.

• Since loss of eyesight may result when leaked fluid from batteries gets into your 

eyes, immediately rinse your eyes with a large amount of clean water, and then 

seek medical attention.

Follow these guidelines to avoid personal injury, liquid leakage, burns 
or heat.

• When the P-touch labeler is not being used, store it out of the reach of children. In 

addition, do not allow children to put any P-touch labeler parts or labels in their 

mouths. If any object has been swallowed, seek medical attention.

• Do not touch metal parts around the print head immediately after printing.

• Do not touch the cutter blade. (See Parts Description.)

• If leaked fluid from batteries gets on your skin or clothes, immediately rinse them 

with clean water.

• Remove the batteries and disconnect the AC adapter if you do not intend to use the 

P-touch labeler.

• Do not use any batteries other than those specified. Do not use combinations of old 

and new batteries or combinations of different types, different charging levels, 

different manufacturers or different models. Do not insert a battery with its plus and 

minus ends reversed.

• Do not drop or hit the P-touch labeler/AC adapter.

• Do not put your finger inside the P-touch labeler when you close the cassette cover.

• Before using Ni-MH rechargeable batteries, carefully read the instructions for the 

batteries and battery charger, and be sure to use them correctly.

• When using Ni-MH rechargeable batteries, charge the batteries with a specialized 

battery charger before using the batteries.

• Depending on the location, material, and environmental conditions, the label may 

unpeel or become irremovable, the color of the label may change or be transferred 

to other objects. Before applying the label, check the environmental conditions and 

the material.

• Do not use the P-touch labeler in any way or for any purpose not described in this 

guide. Doing so may result in accidents or damage to the P-touch labeler.

• Use only Brother TZe tapes with the P-touch labeler. Do not use tapes that do not 

have the 

 mark.

• Only use a soft, dry cloth to clean the P-touch labeler; never use alcohol or other 

organic solvents.

• Use a soft wipe to clean the print head; never touch the print head with your fingers.

• Do not put any foreign objects into the tape exit slot or AC adapter connector or 

battery compartment, etc.

• Do not place the P-touch labeler/batteries/AC adapter in direct sunlight or rain, near 

heaters or other hot appliances, in any location exposed to extremely high or low 

temperatures (e.g., on the dashboard or in the back of your car) or high humidity, or 

in dusty locations.

• Do not try to print if the cassette is empty; it will damage the print head.

• Do not pull the tape while printing or feeding; it will damage the tape and the P-touch 

labeler.

• Any data stored in memory will be lost due to failure or repair of the P-touch labeler, 

or if the batteries expire.

• The P-touch labeler is not equipped with a charging feature for rechargeable 

batteries.

• The length of the printed label may differ from the displayed label length on the 

computer.

• A protective clear plastic sticker is placed over the top panel during manufacturing 

and shipping. This sticker should be removed prior to use.

• When printing multiple copies of a label or using the numbering function printing, the 

P-touch labeler will not detect the end of the tape cassette and will continue 

operating.

• When using Heat Shrink Tube, the printing area will be smaller than when using 

normal tape.

• Do not scratch or subject the CD-ROM to high or low temperatures.

• Do not put heavy objects on the CD-ROM or apply force to the CD-ROM.

• The software contained on the CD-ROM is meant for use with this P-touch labeler only.
See the License on the CD-ROM for details. This software may be installed on 

multiple computers for use in an office, etc.

The purpose of the International ENERGY STAR

®

 Program is 

to promote the development and popularization of 

energy-efficient office equipment. As an ENERGY STAR

®

 

Partner, Brother Industries, Ltd. has determined that this 

product meets the ENERGY STAR

®

 guidelines for energy 

efficiency.

Should you have questions, or need information about your Brother product, we have 

a variety of support options for you to choose from:
USA-Customer Service

Telephone: 1-877-BROTHER (1-877-276-8437)

Fax: 1-901-379-1210

Website: www.brother-usa.com

Supplies/Accessories:

www.brothermall.com or 877-552-6255

Safety Precautions

 WARNING

Indicates a potentially hazardous situation which, if not 

avoided, could result in death or serious injuries.

 CAUTION

Indicates a potentially hazardous situation which, if not 

avoided, may result in minor or moderate injuries.

ELECTRONIC LABELING SYSTEM

Thank you for choosing the PT-P700. Your new P-touch labeler uses P-touch Editor Lite software, 
which is already installed on your P-touch labeler.
There is no need to install any software or drivers onto your computer in order to make creative labels. 
This manual includes important precautionary information and simple instructions for operating your 
new P-touch labeler. Be sure to read the instructions before use and use the product in accordance 
with these instructions. Keep this manual handy for future reference. If new versions of the PT-P700 
software become available, this manual may not reflect the updated features. Therefore, you may find 
that the software and the contents in this guide are different.

Printed in China
LAD095001

English

Español

PT-P700

User’s Guide

General Precautions

Federal Communications Commission (FCC) Declaration of 

Conformity (For USA Only)

Responsible Party : Brother International Corporation

200 Crossing Boulevard

P.O. Box 6911

Bridgewater, NJ 08807-0911 USA

TEL : (908) 704-1700

declares that the products

Product Name :

Brother P-touch Electronic Labeling System

Model Number :

PT-P700

comply with Part 15 of the FCC Rules. Operation is subject to the following two 

conditions: (1) this device may not cause harmful interference, and (2) this device 

must accept any interference received, including interference that may cause 

undesired operation.
This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses, and can radiate radio frequency 

energy and, if not installed and used in accordance with the instructions, may cause 

harmful interference to radio communications. However, there is no guarantee that 

interference will not occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Important

• The enclosed interface cable should be used in order to ensure compliance with 

the limits for a Class B digital device.

• Changes or modifications not expressly approved by Brother Industries, Ltd. 

could void the user’s authority to operate the equipment.

International ENERGY STAR

®

 Compliance 

Statement

Important Information

Summary of Contents for P-Touch PT-P700

Page 1: ...uch labeler or if the batteries expire The P touch labeler is not equipped with a charging feature for rechargeable batteries The length of the printed label may differ from the displayed label length on the computer A protective clear plastic sticker is placed over the top panel during manufacturing and shipping This sticker should be removed prior to use When printing multiple copies of a label ...

Page 2: ...S X v10 6 8 v10 8 x Double click PT P700 on the desktop and the P touch Editor Lite application icon 4 P touch Editor Lite starts For details on using P touch Editor Lite see the Software User s Guide included on the CD ROM for Windows or download the Software User s Guide by visiting the Brother Solutions Center at http solutions brother com for Macintosh Macintosh users can access this URL direc...

Page 3: ...C power outlet Available settings Enable Disable 2 Auto power off when AC adapter is connected Specify the amount of time that passes before the printer turns off automatically Available settings None 10 20 30 40 50 minutes 1 2 4 8 12 hours 3 Contents Specifies the printer information that will be printed Available settings All Usage Log Printer Settings 4 Length adjustment Adjusts the length of t...

Page 4: ...ssette installed The cassette cover was opened during printing Transmission error Overheating error Cutter error Red lamp flashes in 0 3 second intervals System error Problem Solution After exiting P touch Editor Lite how do I restart the program while the P touch labeler is still on There are three ways to restart Perform any of the following Turn off the P touch labeler and then turn it back on ...

Reviews: