Brother P-Touch PT-H100, Service Manual

Page: 57 / 81

III - 34
3.5 Inspect Cassette Sensor Mode ([3] key) : Perform at
Production
Press the [ENTER] key or [3] key at the state of < Figure 3.4-2 >, and < Figure 3.5-1 >
will be displayed.
Figure 3.5-1 Inspect Cassette Mode Indication
Press the [ENTER] key at the state of < Figure 3.5-1 >, and < Figure 3.5-2 > will be
displayed.
■
Outline of "Inspect Cassette Sensor mode"
- Check the pressing of the four sensor switches (cassette sensor
1
~
3
, cutter
sensor).
- Press the
1
,
2
,
3
and the cutter sensor in this order.
- Press the sensor by itself. If the sensor is pressed with others, the NG is judged.
- The pressing order of the cassette sensor is as shown below.
- Press the [ENTER] key in the middle of inspection (< Figure 3.5-2 >~< Figure 3.5-5 >),
and < Figure 3.5-1 > will be displayed.
Figure 3.5-2
Shift to < Figure 3.5-3 > by pressing / releasing the cassette sensor
1
.
When the sensor except
1
is pushed at the state of < Figure 3.5-6 > will be displayed.
Figure 3.5-3
C S T
←
Cassette sensor position
Locking boss
1
2
3
C S T 1
C S T 2