Brother P-Touch PT-E800W User Manual Download Page 117

Page: 117 / 254

Changing the P-touch Labeling System Settings

106

Settings Dialog Box

1 Printer

Lists the connected printers.

2 Import

Imports settings from a file.

3 Export

Saves the current settings in a file.

4 Setting Tabs

Contain settings that may be specified or changed.

5 Apply Settings to the Printer

Applies the settings to the printer.

6 Print Unit Settings

Prints a report containing firmware version and configuration information.
You can also print this report using the

(Feed and Cut) button for more than 10 seconds. See

Confirming the P-touch Labeling System Settings

on page 112 for more information.

Note

When you print this report, use 0.94" (24 mm) or 1.4" (36 mm) tape.

7 Factory Reset

Resets printer settings to factory settings.

8 Current Settings

Retrieves the settings from the currently connected printer and displays them in the dialog box.

9 Exit

Exits the Printer Setting Tool.

Summary of Contents for P-Touch PT-E800W































































































































































































































































Search results

Summary of Contents for P-Touch PT-E800W

Reviews:

Related manuals for P-Touch PT-E800W

Brands by name

Popular brands

Brother P-Touch PT-E800W, User Manual

Search results

Summary of Contents for P-Touch PT-E800W

Reviews:

Related manuals for P-Touch PT-E800W

Brands by name

Popular brands