If the cutter blade becomes blunt after repetitive use
and the tape cannot be cut cleanly, turn the cutter
board as shown in the illustration
1
.
If you still have difficulties, replace with new cutter unit
(stock no. TC-4) from an authorized Brother reseller.
X
Replacing the Cutter Unit
1.
Remove the two sections of the Cutter Unit
(green) in the direction of the arrows as
illustrated below
2
.
2.
Install a new Cutter Unit. Push it in gently until
it snaps into place.
information about the recommended batteries.
Supplies and Accessories
Cassettes:
See the included
Supplies and
Accessories Guide
.
AC Adapter:
AD-24ES/AD-24ESA/AD-
24ESAW/AD-24ESA-01/AD-
24-ESAW-01
Cutter Unit:
TC-4 (replacement)
WARNING
Do not touch the cutter blade directly with your fingers.
Specifications
Dimensions:
(W x D x H)
4.3" X 8.0" X 2.2"
(Approx. 109(W) X 202(D) X 55(H)mm)
Weight:
Approx. 0.9 lb. (Approx. 400 g)
(without batteries and tape cassette)
Power supply:
Six AAA alkaline batteries (LR03)
Six AAA Ni-MH batteries (HR03)*
1
Optional AC Adapter (AD-24ES/AD-
24ESA/AD-24ESAW/AD-24ESA-01/
AD-24-ESAW-01)
Tape cassette:
Brother P-touch TZe tape widths:
0.13" (3.5mm), 0.23" (6mm),
0.35" (9mm), 0.47" (12mm)
Brother HGe tape widths:
0.23" (6mm), 0.35" (9mm), 0.47" (12mm)
Cutter Board
