16
Adding a new line of text
●
To end the current line of text and start a new one, press
n
. “
” appears at the
end of the line.
Adding a new text block
●
To create a new text block so that one section of the text can have a different
number of lines than another, press
g
, then
n
. “
” appears at the end of
the block.
For example, text entered as shown below, will be printed as follows.
Inserting text
●
To insert the text that you type at the cursor’s current position, make sure that the
Insert
indicator is displayed. Otherwise, press
i
to enter
Insert
mode.
●
To replace the text at the cursor’s current position instead of inserting it, press
i
to exit
Insert
mode.
☞
The number of text lines that can be printed depends on the width of the tape.
☞
The line number on the display indicates the line number of the text block.
☞
A single label can only contain a maximum of fifty text blocks.
☞
The number of the block that the cursor is in is indicated at the bottom of the display.
☞
All texts blocks have the same formatting features.
☞
While trying to print a large amount of data at one time, some outputted labels may be
blank. For example, when printing 50 records, the maximum number of characters
that can be printed at one time is limited to approximately 200.
Tape Width
Maximum Number of
Lines That Can Be Printed
6 mm
2
9 mm
2
12 mm
3
18 mm
5
24 mm
7
2:456
1:ABC_
R
R
R
----
-- 1
NORMAL 2
Summary of Contents for P-touch PT-2460
Page 2: ...USER S GUIDE ...
Page 59: ...MODE D EMPLOI ...
Page 116: ...Printed in China Imprimé en Chine LN3961001 ...
