HELPFUL HINTS
Reset your P-touch Pro label maker when you want to
initialize the settings, or in the event it is not working
properly. Resetting clears all the text, settings, and
stored files.
1
Turn off the P-touch Pro label maker, hold
down
and
, and then press
to
turn the P-touch Pro label maker back on.
2
First release the power button, and then
release
and
.
The P-touch Pro label maker turns on with the
internal memory reset.
NOTE
4
Shortcuts
Language
Space key
Undl/Frame
Label Length
Margin
CableRot/Rpt
File
Tab
Tab Length
Unit
LCD contrast
Resetting the P-touch
Pro Label Maker
If you have questions or need information
about your Brother product, please visit us
online or call.
For FAQs, Troubleshooting, and Manuals,
To order supplies and accessories, visit
1-877-552-6255.
For USA Customer Service, call
1-877-BROTHER (1-877-276-8437)
Fax: 1-901-379-1210
CAUTION
USING A COMBINATION OF DIFFERENT
BATTERIES (SUCH AS ALKALINE WITH
Ni-MH) , MAY RESULT IN AN EXPLOSION.
DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
• Remove the batteries if you do not intend to
use the P-touch Pro label maker for an
extended period of time.
• Dispose of batteries at an appropriate
collection point, not in the general waste
stream. Be sure to observe all applicable
federal, state, and local regulations.
• When storing or discarding a battery, wrap
it with cellophane tape to prevent it from
short-circuiting. (see illustration)
1. Cellophane tape
2. Alkaline or Ni-MH
battery
Replace all six batteries at the same time. Do
not mix old and new batteries when you use
the machine.
2
1
