Brother P-Touch E850TKW User Manual Download

Page: 76 / 255

Using the Data Transferred to the P-touch

Note

• When editing templates linked to a database:

• When an object that is not linked to the database was edited, select [

Print from Database

] to print.

• When an object that is linked to the database was edited, the edited contents will be deleted if you select

[

Print from Database

]. Therefore, print the template just by selecting [

Print Edited Label

]

using the or key.

• To select the range from the database that you want to print, follow steps

When the Template is

Linked to the Database and will not be Edited

• To edit the database, see

Editing the Database

on page 71.

When the Template is Linked to the Database and will not be Edited

Select [

Transferred Templates

] in the Home screen using the , ,

key, and then press

the

Enter

key.

Select the template using the or key, and then press the

Enter

key.

Note

When the template is linked to a database, the

icon appears in the upper-right corner of the screen.

Select [

Print from Database

] using the or key, and then press the

Enter

key.

The contents of the database linked to the template appear.

Select the first record in the range that you want to print using the , ,

key, and then press

the

Enter

key.

Select the last record in the range that you want to print using the , ,

key, and then press

the

Enter

key to start printing.

When the range is set, the selected records are highlighted.

Note

To return to the previous step, press the

Esc

key.

Summary of Contents for P-Touch E850TKW
































































































































































































































































Search results

Summary of Contents for P-Touch E850TKW

Reviews:

Related manuals for P-Touch E850TKW

Brands by name

Popular brands

Brother P-Touch E850TKW, User Manual

Search results

Summary of Contents for P-Touch E850TKW

Reviews:

Related manuals for P-Touch E850TKW

Brands by name

Popular brands